CrossBox Three60 P3 200/300

The CrossBox range of crossfit and functional training rigs is a unique made to order range of rigs manufactured in the UK to the highest specification and as such a wide range of powder coat colours are available as standard but we can also match components to very specific RAL colours for a small additional premium.

Being made from modular components there is a huge number of ways the entire CrossBox range of rigs can be customised and expanded upon however for ease and simplicity we've listed prety much most of the default configurations to make it easier for you to visualise how the rigs will fit into your gym or training environment.

This CrossBox Three60 P3 200/300 is a free-standing double Squat Rack CrossFit Rig to allow squats to be performed from included J-Hooks and TRX straps and suspensiopn trainers to be attached to the side pull-up/chin bars. Safety rails/catchers are also available as an optional extra if required.

There is a huge selection of add-on components for the whole CrossBox range, from ropes for high-rope climbs (on the high tower "H" range) to punch-bag arms, step-up platforms, gym-ring attachment arms and so much more due to the modular construction of the frames.

The CrossBox Three60 H3 rig comprises is essentially 2 of the Three60 squat stations back-to-back with the same 200cm or 300cm wide cross-beams joining each section but with an additional 200cm or 300cm section making the primary use of the frame the pull-up chin bars (front wing) and the rear High-Mount attachments particularly good for multiple gym rings for users to perform/practice muscle-ups etc.

Free-Standing rigs need to be securely attached to the floor with appropriate anchor bolts or fixings, especially important when multiple users might be exercising on the same side of the rack at the same time.

NOTE: CrossBox Rigs and Frames do not include any weights or bars which must be purchased elsewhere on the site depending on your requirements.

Suggested Minimum Working Area:

CrossBox Three60 H3 200 = 3300mm x 9300mm (9 to 13 users)

CrossBox Three60 H3 300 = 3300mm x 12300mm (16 to 20 users)

Lead time on this rig is typically 4 to 6 weeks depending on factory workload.

For outdoor use this item can be galvanised before powder coating of galvanised without any powder coat - call for current pricing.

Colour options are selected as being the main frame e.g. Legs etc at the "premium flat" finish while accessories and add-ons including monkey bars and rig wings etc where optional are painted in the "fine textured" finish to enhance general grip and reduce chance slippage when in use.